Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations KootK on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Sticking Contact Problem Abaqus

Status
Not open for further replies.
Tsaqif

Tsaqif

Mechanical
Oct 25, 2023
1
Dear all
I am on simulate gear contact on abaqus (there are 3 gear), but after few second the gear 3 is sticking (picture on attachment) and make the simulation aborted, so the gear 3 is slipping to sticking. Does anyone knows how to prevent sticking contact in abaqus?
Thanks
 
 https://files.engineering.com/getfile.aspx?folder=d258f205-7930-4694-b9b0-a3b9d3eb3cbd&file=gear.JPG
Replies continue below

Recommended for you

Sort by date Sort by votes
Do you mean the CSTATUS result ? Are you modeling the gears as rotating discs with no teeth ? What is the contact definition ?
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

nilesh_dot
  • Question
Problem during linking - Abaqus/Standard User Subroutines
Replies
2
Views
304
nilesh_dot
nilesh_dot
vitoram14
  • Locked
  • Question
Linking Problem ABAQUS FORTRAN
Replies
1
Views
251
FEA way
FEA way
Saks1235
  • Question
ABAQUS:- Problem with Concentrated AM model Vs Goldak AM model
Replies
3
Views
841
FEA way
FEA way
mj345
  • Question
contact generation
Replies
2
Views
71
mj345
mj345
Balamugesh M
  • Locked
  • Question
Abaqus user subroutine problem 1
Replies
12
Views
244
IceBreakerSours
IceBreakerSours

Part and Inventory Search

Sponsor

Back
Top Bottom