Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Stone Columns

Status
Not open for further replies.

GeoGrouting

Civil/Environmental
Jun 24, 2007
65
0
0
CA
Would appreciate feedback on the optimum gradation of stone column backfill materials. They say around Thanks.

Noah
 
Replies continue below

Recommended for you

A common material used in the Pacific NW is 1-1/4" to 3/4" clear crush. This has also been called a Railway Ballast. It is important that this is a clean material with less than 5-percent passing the #200.
 
Work with your local contractor. They are very good at providing information not only on what is best for them but what materials, locally, are the best. They are often happy to help by knowing about the job and by having a bit of inside information about the tender.
 
Status
Not open for further replies.
Back
Top