Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Storm Sewer Unclogging Spec

Status
Not open for further replies.

ACivil

Civil/Environmental
Jul 18, 2005
5
0
0
PR
Have an existing storm sewer project, need to specify a method to unclog, clean, flush and legally dispose of the sediments and debris. Is there any web link or ideas from your experience might like to share?
 
Replies continue below

Recommended for you

Just write down what you want to happen.
1. Remove all forgiegn mater from storm drains by hydro-jet cleaning or other approved method. ( these may be bucket machine scrapper. afterwards the line still must be jhydro-jet cleand.)
2. All water and materials must be removed and disposed of in a proper manner.
3. All drains must be closed circuit televised. The inspection shall be recorded in DVD format and submitted to owner for payment. The DVD shall be acompanied by inspection report noting any and all defects in the line. Tving shall be done with NO flow in the pipe.
 
Status
Not open for further replies.
Back
Top