Can anyone advise on process required to stress relieve uhmwpe sheet up to 75 mm thick, I have machined a mould for use in a microwave and it has distorted quite considerably, I would like details of the process required to anneal uhmwpe prior to machining after rough machining and after final machining. Thanks
Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Stress Relieving UHMWPE
- Thread starter kiwieng
- Start date
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question