Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

structure of beams elements contact problem

Status
Not open for further replies.
Replies continue below

Recommended for you

In such case check the documentation chapter "About general contact in Abaqus/Explicit" (paragraph "Considerations for edge-to-edge contact"). It describes how general contact works for two contacting beam elements and may help you resolve the problem.
 
Status
Not open for further replies.
Back
Top