Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

stucco clearance (detailing question)

Status
Not open for further replies.

PSUengineer1

Structural
Jun 6, 2012
143
0
0
US
The distance (clearance) between the bottom of a weep screed in a stucco wall and the top of the intersecting roof shingles should be 2 inches…correct? Can anyone point me to a code reference that states this?
Thanks.
 
Replies continue below

Recommended for you

The weep screed is required to be installed at least 4" above raw earth or 2" above paved surfaces. An intersecting roof surface would be the same as a paved surface, so 2" is correct. Reference is ASTM C1063 (paragraph 7.11.5) as referenced in Chapters 25 and 35 of the International Building Code and state codes using the IBC as a model code.


A Great Place For Engineers to Help Engineers

Follow me there.....
 
Status
Not open for further replies.
Back
Top