Studio Spline - how to add point NX9 / NX10

[ZikiJM]

Hi all,
I have tried to find answer for my question, if is possible to add point(s) between current in the Studio Spline.
I used to NX 9 and 10.

There isn't option for adding points. I have found some help from thread561-370672, but doesn't work it.
Do you know some elegantly solution?

Thank you in advance.
Jan

 

[Toost]

I can agree that this isn't that intuitive...

Turn on the "Point on curve" , then you can simply pick a point ON the spline and it will be a new point/ pole. ( in the order where selected) . Then drag this point/pole to whatever position.

See attached image

Regards,
Tomas

 

[ZikiJM]

...Unintuitive and with necessary replace the old one for next using, but works.

Thank you for your answer and time
Regards

Jan

 

[Toost]

"and with necessary replace the old one for next using,"

this means ? I don't understand.

Regards,
Tomas

 

[ZikiJM]

According your guide I make other spline with using original points plus the new point somewhere among -> I have two splines.
When I have next geometry with link to original spline, I must replace this spline for change of original geometry.

Regards
Jan

 

[cowski]

No need for a second spline. Ignore the other thread and just follow Toost's instructions in this thread.

www.nxjournaling.com