Sub-assembly constraints

[cubalibre000]

Hi,
in NX3, when selecting a component of sub-assembly in the graphic area, the mating condition mask show only the mating of that sub-assembly, with NX7 I see that all constrains of that sub-assembly.
How can I see only the sub-assembly mates when I select a sub-component in the graphic area ?

Regrads

 

[JohnRBaker]

With the Assembly Navigator's Dependencies panel open, select the constrained Component, be it a single Component or a Sub-Assembly, go to the Dependencies panel and select the 'Magnifying Glass' icon to expand the display of the constraints associative with just that Component, as shown below:

John R. Baker, P.E.
Product 'Evangelist'
Product Design Solutions
Siemens PLM Software Inc.
Industry Sector
Cypress, CA

http://www.siemens.com/plm

http://www.plmworld.org/museum/

To an Engineer, the glass is twice as big as it needs to be.

 

[cubalibre000]

Hi,
I attach an image to better understand.

 

[JohnRBaker]

Can you show us an example of what you mean by "the way NX 3.0 showed you..."?

John R. Baker, P.E.
Product 'Evangelist'
Product Design Solutions
Siemens PLM Software Inc.
Industry Sector
Cypress, CA

http://www.siemens.com/plm

http://www.plmworld.org/museum/

To an Engineer, the glass is twice as big as it needs to be.