I encountered a situation where an earthwork outlet drain was proposed to be connected to the existing watercourse. The pipe will sometimes be submerged, and I am concerned about the backflow into the gutter. Can somebody confirm if that is true, and if so, please explain?
Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
Submerged pipe outlet
- Thread starter flyers7
- Start date
There are suitable check valves available for that situation.
The worst that I have seen;
The construction crews read their survey instruments backwards and sloped the drainage ditch the wrong way.
There was no check valve.
There was a lot of back flow.
Eventually the situation was remedied, including the installation of a check valve.
--------------------
Ohm's law
Not just a good idea;
It's the LAW!
The worst that I have seen;
The construction crews read their survey instruments backwards and sloped the drainage ditch the wrong way.
There was no check valve.
There was a lot of back flow.
Eventually the situation was remedied, including the installation of a check valve.
--------------------
Ohm's law
Not just a good idea;
It's the LAW!
- Status
Similar threads
- Locked
- Question
- Locked
- Question