Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Surface to surface radiation
- Thread starter PedroCarneiro22
- Start date
- Status
- Thread starter
- #2
PedroCarneiro22
Aerospace
In 2D steady state analysis in Workbench, anyone knows why Ansys create additional elements when you apply a heat flux or heat flow in a line?
Ansys creates this new element and after this gives error in the solution because creates a four node element with a non-existing node...
Ansys creates this new element and after this gives error in the solution because creates a four node element with a non-existing node...
- Thread starter
- #3
PedroCarneiro22
Aerospace
I already fixed it.
I am using static thermal analysis and the error was coming from the keyopt options of the surface elements.
I am using static thermal analysis and the error was coming from the keyopt options of the surface elements.
- Status
Similar threads
- Locked
- Question
- Locked
- Question