SW 2009 Bearing Forces

[NL8]

Can anybody confirm if there is a glitch in SW 2009 SP 4.1 where the bearing forces of a study all show up as 0, even though the model definitely shows up as the bearing connector taking a significant load?

Joe Hasik,
CSWP/SMTL/MTLS
SW 09 x64, SP 4.1
Dell T3400
Intel Core2 Quad
Q6700 2.66 GHz
3.93 GB RAM
NVIDIA Quadro FX 4600

 

[NL8]

Stupid mistake in settings on my part, please ignore.

Joe Hasik,
CSWP/SMTL/MTLS
SW 09 x64, SP 4.1
Dell T3400
Intel Core2 Quad
Q6700 2.66 GHz
3.93 GB RAM
NVIDIA Quadro FX 4600

 

[silver101]

I'm obviously making the same error/omission - can you advise the setting correction?

cheers

 

[GregLocock]

Set UserStupidity=1 in the Options menu.

Cheers

Greg Locock


New here? Try reading these, they might help FAQ731-376

http://eng-tips.com/market.cfm?

 

[silver101]

Thanks for nothing.

 

[silver101]

Simple: ensure model is entirely resolved.
Not so obvious: using 'Set Lightweight to Resolved" within the already opened model is inconsistent/doesn't work. Am using SW2009 SP0.0, maybe SP5.0 sorts this one out.