Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations GregLocock on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Switching between coordinate/grid systems 1

Status
Not open for further replies.
Geocito

Geocito

Civil/Environmental
Dec 14, 2007
9
I've added some coordinate/grid systems to a model I'm working on. I need them to define a complex geometry (holes in shells). However, the GLOBAL system is always displayed. How can I choose the coordinate/grid system I want to use?
Thanks
 
Replies continue below

Recommended for you

Sort by date Sort by votes
Button in bottom right that says "Global" - click on it...
 
Upvote 0 Downvote
Thank you.
Very simple, but I had never noticed and couldn't find any reference to this in the manual.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

saruncivil
  • Locked
  • Question
Discrepancy deflection value between construction stage Vs Load case
Replies
0
Views
43
saruncivil
saruncivil
netsonicyxf
  • Locked
  • Question
Difference between "Load Object" and "Load Object if Added" in Staged Constructi
Replies
0
Views
70
netsonicyxf
netsonicyxf
ALI FAKHRADDINI
  • Locked
  • Question
How distributed the displacements in the cable/deck joints between cable&deck in cable stayed br
Replies
1
Views
40
ALI FAKHRADDINI
ALI FAKHRADDINI
Bikrum
  • Locked
  • Question
Interface between sap2000 and matlab
Replies
0
Views
28
Bikrum
Bikrum
aacivstudent
  • Locked
  • Question
Difference between undeformed and deformed length of cable element
Replies
0
Views
107
aacivstudent
aacivstudent

Part and Inventory Search

Sponsor

Back
Top Bottom