Tabular Note Issue 2

[BrittToolEngineer]

Greetings: I have a title block on my drawing sheet with a tabular note. There are data in the cells of the tabular note, but they do not display. If I double click on a cell, a window pops up showing me what is in the cell, but it does not display. Can anyone help me with this issue?

Thanks,

​

 

[Toost]

is the cell completely empty or does it display ### ?

If it displays ### NX considers the cell to small to fit the text. make the cell wider and the text should appear as expected.

Regards,
Tomas

 

[BrittToolEngineer]

It does not show ###, but each cell does have a small box with an x in the box at the top left corner of each cell. I've tried resizing, but still does not display the text.

 

[Toost]

A small box with an x, i wonder if it might be trying to use a font which doesn't exist.
select the cell such that it is highlighted, ( not double click, single.) Then press Ctrl+I ( = Information - Object)
search the window for "font". Do you have that font in NX ?

Select the table and change the font for all cells.

Regards,
Tomas

 

[BrittToolEngineer]

Tomas - Changing the font was the answer. Thank you very much for your help.

BW