NewfieSparky
Electrical
- Sep 22, 2005
- 7
Hello,
I am in the process of developing an operating procedure manual for the manual operation of a tapchanger. I was just wondering if anyone had any good links or good sources of information that could help me in my process. Specifically, I would like to come up with a step by step procedure that could be used to change tap settings during peak loading periods. This procedure will be used with the tapchanger controller in the manual position and will only be used to lower voltages during peak loading periods.
Thank you in advance.
I am in the process of developing an operating procedure manual for the manual operation of a tapchanger. I was just wondering if anyone had any good links or good sources of information that could help me in my process. Specifically, I would like to come up with a step by step procedure that could be used to change tap settings during peak loading periods. This procedure will be used with the tapchanger controller in the manual position and will only be used to lower voltages during peak loading periods.
Thank you in advance.