TexasRotorHead
Aerospace
- Dec 21, 2009
- 16
Im sorry for the simple question, but I am having a small difficulty with this problem I am having.
Basically, I need to tap a blind 5/8-8 hole into an aluminum piece I have made.
Almost all of the taps I have found are tandem, so I cannot use them. There are also roughing and finishing sets, but they are a little out of my budget.
Are there any companies that sell cheap acme taps for a blind hole or types of machine shops that cut alot of acme threads?
Thanks.
Basically, I need to tap a blind 5/8-8 hole into an aluminum piece I have made.
Almost all of the taps I have found are tandem, so I cannot use them. There are also roughing and finishing sets, but they are a little out of my budget.
Are there any companies that sell cheap acme taps for a blind hole or types of machine shops that cut alot of acme threads?
Thanks.