Apr 16, 2015 #1 hqureshi Mechanical Apr 16, 2015 1 I would like to know the diverging flow of the two outputs in a tee if I have a incoming flow of Liquid Ammonia @ 20 psi.
I would like to know the diverging flow of the two outputs in a tee if I have a incoming flow of Liquid Ammonia @ 20 psi.
Apr 16, 2015 #2 MikeHalloran Mechanical Aug 29, 2003 14,450 It depends almost entirely on whatever is downstream, both from the other run and from the branch. I.e., you have to model the whole system downstream of the run inlet. Mike Halloran Pembroke Pines, FL, USA Upvote 0 Downvote
It depends almost entirely on whatever is downstream, both from the other run and from the branch. I.e., you have to model the whole system downstream of the run inlet. Mike Halloran Pembroke Pines, FL, USA
