Tee with blind flange or Bend at Pump Header

[selftaught]

I wonder whether to use a tee with blind flange or a bend (for last pump) at the end of pump header. Is there anybody to tell me cons and pros for each one?

 

[Artisi]

I agree, maybe a few more lessons for selftaught wouldn't go astray.

 

[pennpiper]

selftaught,
Do you want some training in Piping Design?
If the answer to that question is Yes! then do the following.
Go to

http://www(dot)pipingdesigners(dot)com

Across the top of the screen you will see a series of buttons.
Training
Tips
Tools
Standards
Forum

Open everything you find behind each button. Print out each and every thing you find there. Make yourself a training manual. Highlight the issues you find interesting. Underline the subjects where you have questions. Study every article. In the Forum read all the questions and all the answers.
On that web site my screen name is "jop" and you will see how to send me an E-mail for answers to piping designer questions. I also urge you to continue to post questions here on Eng-Tips.