Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations SDETERS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Tekla AutoDesign

Status
Not open for further replies.

ikonstruktor

Structural
Sep 8, 2017
2
Hi everyone. Started learning Tekla 2016i. Now trying to check connection. I have started with 141 component, but it does not work with tie force, does not check welds when angles are shop-welded. Does anyone have the same problem & how to resolve it? Great thanks for your attention. (Sorry for my English)
 
Replies continue below

Recommended for you

I have been working toward using Tekla for 3D design. Are you using Tekla Structures? I don't believe Tekla Structures has a connection code checking function.

If you are leaning the program I would highly recommend taking the online class. I did and it was a big in getting started with the program.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor