Test of Fuel additive

[Methanolic]

G'day, We have a product that fixes the ills of Methanol use in ICE's.

We have tested the fuel additive in our vehicles and have done some engine oil testing running M85 and M100.

We would now like to move to do some industry recognized testing at industry recognized labs. Being outsiders, we could use some guidance as to what tests and where to get them done so our product can be taken seriously.

Thank you in advance.

Robert

 

[Lou Scannon]

The first step will be to tell us what shortcomings of methanol your product is intended to address, and the physio-chemical mechanisms that are utilized to this end. Then we can recommend the type of testing needed and potential test venues.

"Schiefgehen will, was schiefgehen kann" - das Murphygesetz

 

[Methanolic]

Our chemical will not cause corrosion or harm rubber parts in the engine and Fuel system. i.e. works with any current ICE without the need of special fuel lines etc.

As mentioned, We have done nearly 15,000KM of testing in two non flexfuel vehicles and also run it in a race engine optimized for Methanol (40 Hours) We have taken the engine apart and analyzed the Oil and have found no issues.

We are a small co (self funded) so would like to get the highest impact and recognition from any lab testing.

Thank you

 

[140Airpower]

Methanolic, when you say your chemical "will not cause corrosion or harm rubber parts" do you mean that with your product as an additive Methanol "will not cause corrosion or harm rubber parts" in engines where Methanol WILL cause corrosion and harm rubber parts without your product?

 

[Methanolic]

I meant when mixed with Methanol it helps prevent corrosion and materials degradation associated with Methanol. Also it solves the mixing / separation issue between Methanol and Gas/ Diesel.

 

[berkshire]

How about Ethanol,
I am being driven nuts by ethanol being hydroscopic and absorbing water into the fuel.
This is not a problem on motors that run on a regular basis, however on motors that sit for several weeks at a time, phase separation is a real problem.
B.E.

 

[Methanolic]

I don't believe our solution works for Ethanol

Anyone have any input to our original questions?

 

[ivymike]

I think you need to identify your market and your distribution method before you start down the path of advertising your product. "Credibility" of a lab depends on who you are talking to.

 

[dgallup]

Based on your greeting I assume your are in the southern hemisphere. I don't know anything about test labs or certification down under. Here in the US, Southwest Research Institute is highly regarded and has worked with many companies both in product development and certification. They cover many areas but include Engine, Emissions and Vehicle Research and Fuels and Lubricants Research.

----------------------------------------

The Help for this program was created in Windows Help format, which depends on a feature that isn't included in this version of Windows.

 

[Methanolic]

Thanks mate, appreciate it. I'll give em a call and see what they have to say

 

[drwebb]

Scan through the ASTM petroleum methods for indications of what tests are 'industry standard' for fuels. You can also research fuel or competitive additive product data sheets for indications of relevant test methods. SwRI can do 'bench' tests, but really specializes in more elaborate engine tests; for simple stuff the services can be had elsewhere as well.