The 2012 Siemens PLM calendars are now available... 3

[JohnRBaker]

I hope Dave doesn't take this down as the only thing we're trying to do here is give away some FREE 2012 Siemens PLM calendars:

http://am.siemensplmevents.com/?elqPURLPage=1403

BTW, all of the images seen in the calendar were produced from models created AND rendered using either NX or Solid Edge.

John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Industry Sector
Cypress, CA

http://www.siemens.com/plm

UG/NX Museum:

http://www.plmworld.org/p/cm/ld/fid=209

To an Engineer, the glass is twice as big as it needs to be.

 

[joycejo]

Thanks JOhn!

John Joyce
N.C. Programming Supervisor
Barnes Aerospace, Windsor CT
NX6.0.5.3

 

[CPaul]

thank you

 

[ewh]

What's the catch? It used to be like pulling teeth to get one of these...
Thanks John!

"Good to know you got shoes to wear when you find the floor." - [small]Robert Hunter[/small]

 

[4mranch6]

Thanks John.

 

[looslib]

Ordered mine.
Thank you.


"Wildfires are dangerous, hard to control, and economically catastrophic."

Ben Loosli

 

[MickyV007]

When living in Europe, you don't have that much luck to obtain one. :-(

Best regards,

Michaël.

NX7.5.4.4 + TC Unified 8.3
Win 7 64 bit

 

[RUGmechanic]

Ordered... Is there a problem with Europe ?
Mailing should not be a problem, what time does it take to hit the "sent" button?
Still ontopic: Got a 2011 hardcopy by the UGS locals last year.

But thanks John (I'm eager to get one)!

Older budweiser

 

[MickyV007]

"To receive a complimentary calendar, please complete the fields below and hit 'Request Calendar'. This promotion is only available in North and South America."

I filled in the form and send the request, but the first rule above the fields stated ; This promotion..... (you can read)

Best regards,

Michaël.

NX7.5.4.4 + TC Unified 8.3
Win 7 64 bit

 

[RUGmechanic]

thanks Michael
I should read better...eagerness....

Older budweiser

 

[JohnRBaker]

Calendars should also be available from local Siemens PLM sales offcies as well as distributors who sell and support either NX or Solid Edge, and this will include Europe and Asia as well as the Americas (that's actually how I got my calendar, from the sales office on the first floor of our building here in Cypress).

John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Industry Sector
Cypress, CA

http://www.siemens.com/plm

UG/NX Museum:

http://www.plmworld.org/p/cm/ld/fid=209

To an Engineer, the glass is twice as big as it needs to be.

 

[looslib]

The only time I had no problem getting calendars was the year that the company I worked for had an image in the calendar. We were sent a copy of the image on a wood plaque and 50 calendars to pass around to the engineering department.


"Wildfires are dangerous, hard to control, and economically catastrophic."

Ben Loosli

 

[JohnRBaker]

If you would like to see what some of the early calendars (we've been doing this since 1995) looked like, go to:

http://www.plmworld.org/index.php?mo=cm&op=ld&fid=238

John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Industry Sector
Cypress, CA

http://www.siemens.com/plm

UG/NX Museum:

http://www.plmworld.org/p/cm/ld/fid=209

To an Engineer, the glass is twice as big as it needs to be.

 

[joycejo]

OK has anyone recieved their Calendar yet?
I am still waiting

John Joyce
N.C. Programming Supervisor
Barnes Aerospace, Windsor CT
NX6.0.5.3

 

[jerry1423]

I am still waiting too.

 

[JohnRBaker]

Please email me your mailing address and I'll take care of it (if you don't already know my email address if you just add a couple of periods to my E-Tips username where you'd expect them to be and then add the relevant email stuff I should get it OK).

BTW, John, I've already taken care of yours.

Sorry for the delay...

John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Industry Sector
Cypress, CA

http://www.siemens.com/plm

UG/NX Museum:

http://www.plmworld.org/p/cm/ld/fid=209

To an Engineer, the glass is twice as big as it needs to be.

 

[joycejo]

Got them yesterday!

Thanks John

John Joyce
N.C. Programming Supervisor
Barnes Aerospace, Windsor CT
NX6.0.5.3

 

[CAD2015]

Thanks a lot, John!

 

[rdln]

I am also still patiently waiting

 

[JohnRBaker]

If you went to the website and filled out all the information yet you've never gotten your calendar, I can help, but you will need to either post you name and mailing address here or you will need to email it to me.

John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Industry Sector
Cypress, CA

http://www.siemens.com/plm

UG/NX Museum:

http://www.plmworld.org/p/cm/ld/fid=209

To an Engineer, the glass is twice as big as it needs to be.