Nov 11, 2011 #1 izax1 Mechanical Jul 10, 2001 292 Is there a difference in thermal expansion coefficient between Stainless and Carbon steel? Thank you for any input.
Is there a difference in thermal expansion coefficient between Stainless and Carbon steel? Thank you for any input.
Nov 11, 2011 #2 IRstuff Aerospace Jun 3, 2002 44,741 The first hit on websearch: http://www.dogpile.com/info.dogpl.t2.3/search/web?q=thermal+expansion+carbon+stainless+steel TTFN FAQ731-376 Chinese prisoner wins Nobel Peace Prize Upvote 0 Downvote
The first hit on websearch: http://www.dogpile.com/info.dogpl.t2.3/search/web?q=thermal+expansion+carbon+stainless+steel TTFN FAQ731-376 Chinese prisoner wins Nobel Peace Prize
Nov 11, 2011 #3 ione Mechanical Oct 22, 2009 1,342 http://www.engineeringtoolbox.com/linear-expansion-coefficients-d_95.html Regards Upvote 0 Downvote
Nov 11, 2011 #4 Twoballcane Mechanical Jan 17, 2006 951 ? Tobalcane "If you avoid failure, you also avoid success." “Luck is where preparation meets opportunity” Upvote 0 Downvote
? Tobalcane "If you avoid failure, you also avoid success." “Luck is where preparation meets opportunity”
Nov 11, 2011 #5 DRWeig Electrical Apr 8, 2002 3,004 Yes. Yes, there is a difference. Goober Dave Upvote 0 Downvote
Nov 11, 2011 #6 drawoh Mechanical Oct 1, 2002 8,956 izax1, There is a significant difference in thermal expansion between ferritic and austentic stainless steel. Try http://www.matweb.com. Bookmark it. JHG Upvote 0 Downvote
izax1, There is a significant difference in thermal expansion between ferritic and austentic stainless steel. Try http://www.matweb.com. Bookmark it. JHG
Nov 11, 2011 #7 rmw Mechanical Feb 6, 2002 5,724 I you have to ask here in this forum, I have to worry. rmw Upvote 0 Downvote
Nov 11, 2011 #8 MiketheEngineer Structural Sep 7, 2005 4,654 RWM is RIGHT - this is classic sophomore stuff! Yes - there is a diff. My readily available table shows Mild steel at 6.5-e4 and SS at 9.9.-e4. Upvote 0 Downvote
RWM is RIGHT - this is classic sophomore stuff! Yes - there is a diff. My readily available table shows Mild steel at 6.5-e4 and SS at 9.9.-e4.
Nov 12, 2011 Thread starter #9 izax1 Mechanical Jul 10, 2001 292 Well, sorry to bother you, and thanks to for the positive response. (I didn't have the stuff ready at hand, and asking is no offense Upvote 0 Downvote
Well, sorry to bother you, and thanks to for the positive response. (I didn't have the stuff ready at hand, and asking is no offense
