Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Thread Depth

Status
Not open for further replies.
Trent5791

Trent5791

Mechanical
Feb 12, 2014
108
In drafting mode, when using the Hole Callout, how do I change the thread depth to default to 2 decimal places instead of 3.

I know how to change it after I've placed the dimension.

Thank you,
Trent
NX 9.0.3.4
 
Status
Not open for further replies.

Similar threads

Ram K
  • Locked
  • Question
Thread callout in Drawing
Replies
1
Views
448
Toost
Toost
MANox
  • Question
Number of holes in Hole and thread callout
Replies
0
Views
334
MANox
MANox
jtozer
  • Locked
  • Question
NX2206 Custom Journal Breaks Hole and Thread Callout 1
Replies
2
Views
167
jtozer
jtozer
Befuddled
  • Question
Part Families - Threads (symbolic . Detailed)
Replies
2
Views
891
Toost
Toost
cmick31
  • Locked
  • Question
NX Journal Hole Depth & Thru Holes
Replies
7
Views
171
kukelyk
kukelyk

Part and Inventory Search

Sponsor

Back
Top Bottom