Feb 15, 2018 #1 cjabhijit Mechanical Jan 5, 2011 68 0 0 AE thread483-144296 Can we get these kind of Flat O-Lets within The Netherlands. We need these now. Any clue? Thanks & Regards, Abhijit
thread483-144296 Can we get these kind of Flat O-Lets within The Netherlands. We need these now. Any clue? Thanks & Regards, Abhijit
Feb 15, 2018 #2 LittleInch Petroleum Mar 27, 2013 21,097 3 38 GB Try your normal re-inforced branch outlet supplier. The thread before says these are essentially weldolets with no contour machined in. The term flatolet is really a mistake - they should just be called zero contour weldolets. what size and location / use are they called up on?? They should be small size branches ( 1"/ 2") on a very large pipe or vessel (>1m diam?) Remember - More details = better answers Also: If you get a response it's polite to respond to it. Upvote 0 Downvote
Try your normal re-inforced branch outlet supplier. The thread before says these are essentially weldolets with no contour machined in. The term flatolet is really a mistake - they should just be called zero contour weldolets. what size and location / use are they called up on?? They should be small size branches ( 1"/ 2") on a very large pipe or vessel (>1m diam?) Remember - More details = better answers Also: If you get a response it's polite to respond to it.
Feb 18, 2018 #3 mk3223 Mechanical Feb 4, 2006 1,476 0 0 US I thought the fitting is very much common and may be available globally, if not really locally, unless the special size or material was required for your work. Upvote 0 Downvote
I thought the fitting is very much common and may be available globally, if not really locally, unless the special size or material was required for your work.