Oct 6, 2011 #1 chopper75 Aerospace Sep 27, 2011 95 I'm looking for a recommendation for a threaded insert to be used in Acetal, with #6 stainless steel hardware. Will be cycled about a dozen times a day.
I'm looking for a recommendation for a threaded insert to be used in Acetal, with #6 stainless steel hardware. Will be cycled about a dozen times a day.
Oct 6, 2011 #2 TVP Materials Apr 12, 2002 4,592 Here are some useful links: SI® Ultrasonic / Heat Staking Inserts http://www.pemnet.com/fastening_products/pdf/sidata.pdf Dodge® inserts http://www.emhartamericas.com/sites/http://www.emhartamericas.com/files/downloads/d4100-rev-c.pdf Fastening with metal screws (Ticona) http://tools.ticona.com/tools/documents/literature/B.3.2 Fastening with metal screws, farbig.pdf Upvote 0 Downvote
Here are some useful links: SI® Ultrasonic / Heat Staking Inserts http://www.pemnet.com/fastening_products/pdf/sidata.pdf Dodge® inserts http://www.emhartamericas.com/sites/http://www.emhartamericas.com/files/downloads/d4100-rev-c.pdf Fastening with metal screws (Ticona) http://tools.ticona.com/tools/documents/literature/B.3.2 Fastening with metal screws, farbig.pdf
