Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Transition Mesh from fine to Coarse one using

Status
Not open for further replies.
Satiar

Satiar

Mechanical
Dec 23, 2016
11
Dear all
How can i get the transition mesh like the pattern below by ABAQUS!? I get sth similar but it doesn't give me the second (which would be the third one in my model) layer like the picture!
Thank you so much in advance



Transition_mesh_elements_pi9bev.jpg


Transition2_adkqxc.jpg
 
Replies continue below

Recommended for you

Sort by date Sort by votes
The image above has quads only. You have quads and tets so that's one reason.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

AlanSYH_
  • Question
Mesh Convergence Test
Replies
6
Views
314
AlanSYH_
AlanSYH_
shashank306
  • Locked
  • Question
Query on mesh size
Replies
3
Views
105
FEA way
FEA way
Smadar11
  • Locked
  • Question
ABAQUS- stractural model- fine elements in crack area
Replies
3
Views
104
FEA way
FEA way
robertt3
  • Locked
  • Question
ABAQUS/Explicit mesh quality deteriorates
Replies
7
Views
152
robertt3
robertt3
Debdip
  • Locked
  • Question
how to import the geometry from autocad to Abaqus CAE2023
Replies
1
Views
118
FEA way
FEA way

Part and Inventory Search

Sponsor

Back
Top Bottom