Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations GregLocock on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Trawl winch

Status
Not open for further replies.

Testsuya

Marine/Ocean
Oct 20, 2010
3
Can someone tell me why a large majority of design company preference electrical winch over hydraulic winch in fishing vessels?

thank for help..
 
Replies continue below

Recommended for you

Because hydraulic fluid (from inevitable leaks) tastes lousy.
 
This i know.
Also we do not need power pack that takes space. People don't need so much experience in electrical equipment. Towing power in hyrdaulic and electrical equipment is now almost the same.
Do you have any other ideas?
 
The answer you got was complete and coherent.

What problem are you trying to solve?



Mike Halloran
Pembroke Pines, FL, USA
 
it's apparent electric is preferred. fishing vessels don't have a room for power packs or hydraulic aggregates units, hydraulic lines, etc for hydraulic winches that complicates the installation space and maintenance issue, however; the latter simply motor and cable laid on deck, straightforward and simple. that's it


"..the more, the merrier" Genghis Khan

 
laying an electrical wire on a fishing boat is a bad idea. Proper marine construction would call for running the conduit under deck and up through a penetration in the way of the motor.

Hydraulic systems have more components and require more expertise to operate than finding a bad wire or changing out a bad motor, but one of the main reasons for an electric system is that an oil spill can cause up to a $50,000 dollar fine from USCG
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor