tree disappeared 3

[SPeti]

I tried to reduce the size of the tree with the scroll. At least it disappeared. Please help me if you know what to do!
(F3 shows as active, but nothig can be seen on the screen.)

 

[Ashvanth]

Hello there,

You will have the XYZ axis at the right bottom corner of the display area. You can do a mouse click on it so that the geometry grays out. Now you can scroll back the tree using the mouse. Click the same axis after the tree is visible to get back the grayed out geometry.

Hope this works out.

Regards,
Ashvanth

 

[Ataloss]

Adding to what Ashvanth said, if you've completely lost the tree (i.e. you've tried scrolling the tree, zooming out, panning etc. but you just can't seem to find it) you can click on the "Fit All In" zoom command after clicking on the XYZ axis and the tree will automatically zoom back to it's proper size and place.

 

[catiajim]

If it's still too small to see, try opening a part with a smaller tree, and fit it. That should carry to the other document (you may need to close the other part/product when you do this).

 

[SPeti]

Thank you guys!