Nov 18, 2003 #1 rigid Automotive Sep 12, 2003 5 Looking for plans for a tubing notcher must be able to cut up to 2 od tubing. Any help is greatly appreciated
Looking for plans for a tubing notcher must be able to cut up to 2 od tubing. Any help is greatly appreciated
Nov 22, 2003 #2 Rick4004 Mechanical Mar 23, 2003 6 I have a design for a tube notcher to cut round holes in round tubes at various angles, but believe me, you can buy one for less than you can make a decent one for. Check out Enco, Pro-Tools, William Lowbuck Tools. Upvote 0 Downvote
I have a design for a tube notcher to cut round holes in round tubes at various angles, but believe me, you can buy one for less than you can make a decent one for. Check out Enco, Pro-Tools, William Lowbuck Tools.
Nov 24, 2003 Thread starter #3 rigid Automotive Sep 12, 2003 5 Cost is not really an issue for material and I have free access to cnc machines so its not a problem. Upvote 0 Downvote
Cost is not really an issue for material and I have free access to cnc machines so its not a problem.
Nov 24, 2003 #4 Rick4004 Mechanical Mar 23, 2003 6 Post your e-mail address and I will contact you off the forum. Upvote 0 Downvote
Nov 26, 2003 Thread starter #5 rigid Automotive Sep 12, 2003 5 Here is my correct email address prud_hommetom@hotmail.com thanks Upvote 0 Downvote
Oct 19, 2004 #6 cadastrophe Mechanical Nov 29, 2002 36 I just saw plans for a tubing notcher on ebay. Theres one here too. http://www.rorty-design.com/content/CAD_plans.htm Upvote 0 Downvote
I just saw plans for a tubing notcher on ebay. Theres one here too. http://www.rorty-design.com/content/CAD_plans.htm
