Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Congratulations SSS148 on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Turbine air starter

Thread starter George3
Start date Aug 29, 2003

Status: Not open for further replies.

Aug 29, 2003

George3

New member

Hi,

Trying to find a constant pressure turbine (like the ones used in turbine air starters) with an outer diameter between 1.5 and 2 inches!
Off-the shelf they go up to 3 inches. Even better if it is a complete starter (inclusive RGB).
Any ideas?

Thanks a lot,
George