Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations SDETERS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Tutorial Part in V20 doesn't load

Status
Not open for further replies.

JK1946

Electrical
Oct 4, 2008
33
I just reloaded V20 Solid Edge on WIN7. Took a trick to get it loaded but it's up and running. The only thing not running is when the tutorial is running it launches the right panes but the part for the selected tutorial does not get loaded. No idea how to get the part loaded.....
 
Replies continue below

Recommended for you

Might be a missing a dll, especially if you're running 64 bit.

Posting guidelines faq731-376 (probably not aimed specifically at you)
What is Engineering anyway: faq1088-1484
 
Or, if 64 bit it may just be that the file paths are messed up.

Posting guidelines faq731-376 (probably not aimed specifically at you)
What is Engineering anyway: faq1088-1484
 
Win7 is 64 bit....what dll....or what path? I looked at file assignments but there is no mention of tutorial folders
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor