Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Two Phase Under Voltage Relay

Status
Not open for further replies.

YERUK123

Electrical
Feb 5, 2012
15
Hi,

Can anyone suggest Two Phase Under Voltage relay? I am looking for a auxilary relay which can be mounted on DIN Rail and I have only Two Phase(R and Y) of VT as input.

Thanking you in advance.
Yeruk
 
Replies continue below

Recommended for you

If all you have is R and Y, use a single phase relay. If you have a third wire, how is it derived?


Bill
--------------------
"Why not the best?"
Jimmy Carter
 
What Bill said.
You can two single phase relays and connect contacts of them in parallel or in series
 
Can you use a 3 phase relay and wire 2 of the relay inputs with R and 1 input with Y?
 
IS this really 2 phase (vs. open delta)? If so, I believe you can look into protection and controls for German based railway systems, which are 2 phase. Siemens, Alstom, ABB, etc.

What is your exact application?
 
Three phase voltage rely can see not connected phase as loss of phase situation
 
Not if you connect one of the phases twice..
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor