Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations SDETERS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

UMAT subroutine FUNG Model for heart tissue simulation

Status
Not open for further replies.

masithuf

Bioengineer
Jan 7, 2014
3

Hello

I have written a UMAT subroutine but when i run the code it completes successfully. I am using C3D10H elements and FUNG model. The subroutine is working fine, as the job completes successfully. However, when I try to see the results from the ODB file I get the following message error:

“The selected Primary Variable is not available in the current frame for any elements in the current display group.”

Is this error due to freequcy? If so, how do I resolved this. As a rule of thumb, the odb file should be atleast 5 times that of inp (this is the case in my analysis). Could this be because there is something wrong in my subroutine? I will appritiate your input.

Pleae let me know if you need mor einformation.

Could you please try to assist.
Thank you.



 
Status
Not open for further replies.

Part and Inventory Search

Sponsor