We ordered 2" Union class 3000, A350 LF2. Our specs mentions dimensions as per ANSI B16.11. But the manufacturer is informing that ANSI B16.11 does not cover unions. It covers only elbow, cross, tee, couplings. As per the manufacturer, the unions will be offered as per the dimensional specs BS3799. Please advise if this is correct
Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
UNION 2" CLASS 3000
- Thread starter kpm21443
- Start date
EdStainless
Materials
Have you read both specs? If not then why ask us.
You put something down as contract term and you don't even know if it applies.
Your bad.
= = = = = = = = = = = = = = = = = = = =
P.E. Metallurgy, Plymouth Tube
You put something down as contract term and you don't even know if it applies.
Your bad.
= = = = = = = = = = = = = = = = = = = =
P.E. Metallurgy, Plymouth Tube
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question
- Locked
- Question