unlock 2d views

[KUNAYALA]

Hello
Nowadays I am working in a very ugly issue: converting catia files to Ug files through an special translator. Unfortunately I have a problem : the drawings are not linked to 3d. In these cases I am remaking the 3d but when I replace the 3d the drawings seems tk be locked. I mean, when 3d is modified , the drawings do not update. Is it possible that they are locked?Is there any way to lock/unlock views?
Thanks in avance for your support!

 

[JohnRBaker]

Are you suggesting that the 2D Drawings existed BEFORE you started to recreate your 3D models?

John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Digital Factory
Cypress, CA
Siemens PLM:
UG/NX Museum:

To an Engineer, the glass is twice as big as it needs to be.

 

[KUNAYALA]

Hello, first of all thanks a lot for your proptly reply.
Yes, the drawings are made before remaking the 3d.Nowadays I am followig these steps:
- new ug drawing and copy and paste the drawings from converted file
- after remaking 3d , replace the father of the views.
-After that the drawings are linked to the new 3d , however, the views are not able to update.
Regards

 

[JohnRBaker]

I suspect that the Drawing is just that, 2D, and as such, there are NO links to any 3D views and therefore there's nothing for the Drawing to update.

John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Digital Factory
Cypress, CA
Siemens PLM:
UG/NX Museum:

To an Engineer, the glass is twice as big as it needs to be.

 

[KUNAYALA]

Unfortunetely I suspected the same....however in catia in these cases the view icon appears broken.
I thought that maybe the views were locked....

Thank you very much for your support¡