Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Unlocking USB access

Status
Not open for further replies.

alphaxy

Structural
Apr 11, 2008
54
0
0
SG
Sir's / Mam's

Our computer here in our office has disabled USB access. How can I configure the settings so I may use it in times I badly need to take home my work?
 
Replies continue below

Recommended for you

Better idea: Every time you need USB access, call or email the IT wonks who supplied you a computer without it or disabled it.

Modifying your computer without their permission could be a career decision.

If you are polite and professional, you may turn them into allies.





Mike Halloran
Pembroke Pines, FL, USA
 
Is USB completely disabled or only disabled for memory sticks? Have you tried a portable floppy drive (costs about £30)? If the work will fit on a floppy, just do it from floppy.
 
Try accessing it through DOS or typing the drive letter (with : etc) into the address bar.
The last place I was at, the must have just had the "interface" (explorer) disabled and you could access as per normal using the above (the later was a bit more "usual" of the two methods).
Regards,
Lyle
 
Status
Not open for further replies.
Back
Top