Update icon 1

[TDEtechnologies]

In an assembly with several configurations, all works good , but in one pârt there is still the update icon, but when we push the update button, the icon is still there.

how is this possible ?

greetz gregory.

 

[brengine]

Have you tried [Ctrl]+Q?

Ken

 

[TDEtechnologies]

Yes, but there are some feutures in rolback state, but they where put in rollback automatically

how come ??

 

[CorBlimeyLimey]

This typically happens when a rebuild is interrupted. Refer to Help > Index > rebuild, interrupt. An interruption can be caused by pressing the Esc key or when an error is found.

Which option is set at Tools > Options > System Options > When rebuild error occurs?
See Help > Index > rebuild, errors for more details.

 

[TDEtechnologies]

"Which option is set at Tools > Options > System Options > When rebuild error occurs?"

This option was set to "Stop", now we put it to "continue" and it works.

Thanks CorBlimeyLimey

 

[CorBlimeyLimey]

You're welcome.

Be aware though, that by allowing the rebuild to continue means that the parts which are causing the original problem are not getting fixed and could cause other problems later.


SW07-SP3