Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations pierreick on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

updating TC11.2.0 to TC11.2.1 - Shared Metadata Cache cannot be updated

Status
Not open for further replies.

vimzj

Mechanical
Oct 28, 2013
3
I finished updating TC11.2.0 to TC11.2.1. (without error message)
cleaned Cache

when starting TC after having entered the UserID and pw it gives the following Login error:

"The Shared Metadata Cache" cannot be updated, because it has not been initialized."

I have tried some methods:
- Generate metadata chache with the Utility. (generate_metadata_cache -u=infodba -p=infodba -g=dba –force)
- Setting TC_USE_PREFS_SHARED_MEMORY=FALSE

Do you have any idea, how to resolve it?
Thanks in advance.


 
Replies continue below

Recommended for you

I have managed to resolve by now:

1. step

2. step
start the serveces/processes.
start TC
a new error message appers telling you to run the generate_metadata_chace.

3. run the generate_metadata_cache in TC cmd again. (without stopping processes/Services) (ca. 2 min.)

4. start TC, and it works. :)
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor