Upgrade Dewpoint meter for Endothermic Generator

[jsalomon]

Hi everybody,

I'm writing to ask you about recommendations for a dewpoint meter. We have been working with an Alnor 7000U but we want to upgrade to something digital and more accurate.

In our plant we have 2 Endothermic Generators (1500 CFH & 2200 CFH) to feed a continuous furnace and two batch furnaces.
As we're investing in a new equipment we're open to evaluate if the dewpoint meter has any other functions and if they would be necessary or useful for our operations/processes or if it would be okay to just stick to the basic equipment.

Any recommendations?

Best regards.

 

[TVP]

What type of heat treating are you performing in those furnaces? What type of atmosphere is being used?

 

[dbooker630]

I recommend Super Systems DP2000 digital dewpoint tester. It has automatic temperature referencing and an automatic pump. You don't have to use the pump with the generators though, only with furnaces.

 

[jsalomon]

Good day,

TVP: Thanks for answering. We generate endothermic atmosphere and in those three furnaces we perform mainly neuter hardening, carburizing and carbonitriding. We have a fluidized bed furnace as well were can offer nitriding and ferritic nitrocarburizing.

dbooker630: Thanks a lot for your recommendation! We'll check over the specs of the tester.

Best regards!