Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

use matlab

Status
Not open for further replies.

rika29

Civil/Environmental
Feb 12, 2014
7
Hi, i nedd help please to read a fild python using matlab, because i would like to caluculte sone elementary matrix.
Some one could help me please
 
Replies continue below

Recommended for you

Is this for school?

TTFN
faq731-376
7ofakss

Need help writing a question or understanding a reply? forum1529
 
I make experimental and I have to confirm with numerical modeling
 
Well you must be a smart kid if you are doing a PhD, so I suggest you look at the tutorials and the help files, which at least on my computer are quite instructive.

Cheers

Greg Locock


New here? Try reading these, they might help FAQ731-376
 
hi ; i prefer using Matlab. and i dont konw Numpy and Scipy. but if you want to help me .....
 
I hope that your PhD has better spelling than what you've done here. I suggest that you peruse the Mathworks site; it shows a number of forum entries related to Python.

TTFN
faq731-376
7ofakss

Need help writing a question or understanding a reply? forum1529
 
hhhh! good! im french that's why my english is very bad
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor