Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Use of post cast grouted anchors

Status
Not open for further replies.

JECCNC

Civil/Environmental
Apr 5, 2003
15
0
0
QA
After concreting one of the combined foundations on site, a new rev of the drawing called for relocating one of the columns, the starter bars already cast are now out of place and new starter bars will have to be drilled and grouted into the already cast foundation, the rebar is 25mm and the concrete is grade 50 , any literature on calculating the embedment length and type of grout to be used
 
Replies continue below

Recommended for you

Try Hilti HIT-RE 500.
You might have to contact a local rep to get details but this should work in diamond cored and damp holes.
 
Eligehausen, Mallée, Silva "Anchorage in Concrete Construction"

Chapter 6 covers bonded anchors pretty well and has several references
 
Status
Not open for further replies.
Back
Top