Apr 4, 2025 #1 F Frokilin Mechanical Feb 6, 2025 15 Would that diametral 67.5 size tolerance be covered with that linear tolerance note on the drawing notes?
Would that diametral 67.5 size tolerance be covered with that linear tolerance note on the drawing notes?
Apr 4, 2025 1 #2 Burunduk Mechanical May 2, 2019 2,508 Yes. But those seem to be millimeters, And therefore that method of assigning a tolerance depending on the number of decimals, is not suitable, because you are not allowed trailing zeros for millimetric dimensions. Upvote 0 Downvote
Yes. But those seem to be millimeters, And therefore that method of assigning a tolerance depending on the number of decimals, is not suitable, because you are not allowed trailing zeros for millimetric dimensions.
Apr 4, 2025 Thread starter #3 F Frokilin Mechanical Feb 6, 2025 15 Thanks Burunduk. That is because of para. 4.3.1 (b), right? Upvote 0 Downvote