Using assembly "scenes" in drafting views

[thixoguy2]

Hi All,

I am using assembly scenes to generate views in drafting. The problem I have is when I have a catdrawing with several sheets, each with a different scene I don't know how to track which scene is in which sheet. I look under links but I don't see any reference to the scene used to generate view.

Thanks in advance

thixoguy (2)

 

[begnor]

you could edit the name of the view in the spec tree to reflect which scene you used on that page.

 

[thixoguy2]

That's a good work around begnor.

thanks

thixoguy(2)

 

[mymylepire]

Hi,
You can find the scene linked to a view by a right click on the view and modify links.
You should see the scene name in the box. You can also point your view to a different scene from there.
Myriam

 

[jackk]

I would name the scenes to describe what they do (ie: EXPLODED ASM WITHOUT COVER) and name the view to something similar

 

[thixoguy2]

Thank You to everyone for tips and suggestions

thixoguy

 

[thixoguy2]

Myriam,

how do you point to a different scene?
I have several created but I only see the one I have selected for the particular view in the box

Thanks for your help
thixoguy