Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Using TARGE 170 & CONTA 173 to connect SOLID65 & SHELL 43

Status
Not open for further replies.
Ahmedarhman

Ahmedarhman

Structural
Sep 6, 2014
10
0
0
EG
I'm trying to use ANSYS to model a composite steel(shell43)-concrete(solid65) beam using contact service (targe170 & conta173) and shear connectors(beam 189)- could you please provide me with some suggestion, recommendations and steps.
 
Status
Not open for further replies.

Similar threads

andradesilva
  • Locked
  • Question
thin-walled 3D solid to a shell
Replies
1
Views
9
Stick.
Stick.
AndrewSkocz
  • Locked
  • Question
Ansys - Solving an input file using command line
Replies
3
Views
28
NRP99
NRP99
md_salem
  • Locked
  • Question
Error in using *CFOPEN command
Replies
0
Views
13
md_salem
md_salem
Sarikahirpara
  • Question
Negative Temperature values due to friction between gears.
Replies
0
Views
19
Sarikahirpara
Sarikahirpara
matparta
  • Locked
  • Question
Relationship between mid shell stresses and top/bottom?
Replies
1
Views
23
SWComposites
SWComposites
Back
Top