If anyone has used VLF AC for withstand testing coils (instead of 60 Hz AC or DC), and/or used VLF for the voltage source to perform Tan Delta/Power Factor or Partial Discharge testing, would you be willing to share your experiences with the rest of us? This will help our industry to maybe move toward using this method of testing larger size windings.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Using VLF AC voltage for motor/gen coil testing
- Thread starter VLFit
- Start date
Similar threads
- Locked
- Question