Jan 16, 2004 #1 nbucska Electrical Jun 1, 2000 2,191 Transparent, lowcost UV resistant plastic? <nbucska@pcperipherals.com>
Jan 16, 2004 #2 patprimmer New member Nov 1, 2002 13,816 PMMA, Acrylic, Methyl Methacrylate. Regards pat Please see FAQ731-376 for tips on how to make the best use of Eng-Tips Fora. Upvote 0 Downvote
PMMA, Acrylic, Methyl Methacrylate. Regards pat Please see FAQ731-376 for tips on how to make the best use of Eng-Tips Fora.
Jan 19, 2004 #3 plasticsguru Materials Mar 15, 2002 16 ASA is also a good choice. Also materials that are average in UV can be modifed with the addition of additives to make them more UV resistant. Upvote 0 Downvote
ASA is also a good choice. Also materials that are average in UV can be modifed with the addition of additives to make them more UV resistant.
Jan 19, 2004 #4 Soupcat Mechanical Aug 28, 2002 74 Not to forget PC...for extra strenghth and toughness. ASA is marketed on it's ability to retain colour. It has exceptional colour fastness properties and won't fade much over time even in direct sunlight. Kieran http://www.moulddesigner.com Upvote 0 Downvote
Not to forget PC...for extra strenghth and toughness. ASA is marketed on it's ability to retain colour. It has exceptional colour fastness properties and won't fade much over time even in direct sunlight. Kieran http://www.moulddesigner.com
Jan 19, 2004 #5 patprimmer New member Nov 1, 2002 13,816 nbucska My original answer was as brief as your question. If you want more info, please elaborate, particularly re application and environment of use. Regards pat Please see FAQ731-376 for tips on how to make the best use of Eng-Tips Fora. Upvote 0 Downvote
nbucska My original answer was as brief as your question. If you want more info, please elaborate, particularly re application and environment of use. Regards pat Please see FAQ731-376 for tips on how to make the best use of Eng-Tips Fora.
Jan 28, 2004 Thread starter #6 nbucska Electrical Jun 1, 2000 2,191 Thanks, Pat. <nbucska@pcperipherals.com> Upvote 0 Downvote
