Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Vapour Pressure of Biodiesel

Status
Not open for further replies.

cajar

Mechanical
Jan 24, 2006
6
0
0
AU
What is the vapour pressure of biodiesel produced from palm oil or tallow? Or really from any oil if it is know.
 
Replies continue below

Recommended for you

We have a variety of temperatures between 30 and 80degC (86-176degF). So any vapour pressures you have in this range would be really useful.
 
Thanks but isnt the vapour pressure different depending on the type of oil used in the process? Or are they going to be small that it doesnt really matter?
 
I have been using that equation to calculate the vapour pressure for the other components in the system, but i can't find the co-efficients for this substance.
 
Can you find a component with almost similar thermodynamic properties and do an approximation calculation?

In perry chemical handbook for example?

 
Status
Not open for further replies.
Back
Top