Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations SSS148 on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Vector groups

Status
Not open for further replies.

thehoover

Electrical
Nov 18, 2002
5
how can I parallel 2 Transformers one with Dyn1 the other with Ynd1.
 
Replies continue below

Recommended for you

Thehoover,

The phase angle shift is same for Dyn1 and Ynd1 transformers i.e. -30degrees. But, I think the problem is, when the two are operated in parallel the transformer with delta low voltage winding will not contribute any current in case of earth fault in the LV system. If this is a necessity, it may be required to provide an earthing transformer connected to the LV terminals of the said transformer.

It is an interesting question, hope others in the forum agree with me.

Thanks
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor