Velocity Boundary Condition Help!

[mmmbordo643]

Hello all,

I am trying to impose a velocity boundary condition on an analytical rigid surface. I have set the time period to 0.0305 seconds, V2 to -100 (mm/s) and the Smooth step amplitude to (0,1; 0.0305, 1). I am trying to get a displacement for the rigid surface of 3.05 mm, However using these criterion it is only displacing 2.65 mm. Any ideas??

Thanks in advance,
Chris

 

[corus]

Maybe the rigid surface has got stuck on something?

corus

 

[Engelien01]

Hey mmmbordo643,

do you solve your problem? Because I want to have a displacement of 2 mm and I get more than 1 cm!!

Thanks
Engelien