Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations IDS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Velocity difference between high point and low point

Status
Not open for further replies.

stberry

Mechanical
Sep 4, 2006
10
Dear all,

I need help.

Given:
1. There are two points. One of them is 1 meter higher than the other.
2. Water goes from the high point to the low point by gravity.

I want to know whether the velocity of the low point is constant or not regardless of the length of two points.

Any help would be appreciated.
 
Replies continue below

Recommended for you

Sorry,
I modified some contents a little bit.

-------------------------------------------------------
Dear all,

I need help.

Given:
1. There are two points. One of them is 1 meter higher than the other.
2. Water goes from the high point to the low point by gravity.

I want to know whether the water velocity at the low point is constant or not regardless of the length of two points.

Any help would be appreciated.
 
Are the points connected? If so, how? With a pipe, or with a trough, or a flat surface?

Katmar Software
Engineering & Risk Analysis Software
 
a pound goes in a pound goes out unless its compressing. so mass in = mass out for water. The density isn't changing unless there is a huge pressure/temperature change, so mass/density = velocity is the same on each end.
 
Not necessarily. We don't know if its not open channel flow and he could have a decreasing head reservoir at the high point, or an increasing head reservoir at the low point, (or v/v) making for a nonsteady state solution.

BigInch[worm]-born in the trenches.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor