Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

vericut

Status
Not open for further replies.
gang1

gang1

Industrial
Aug 10, 2003
12
It is for those who uses Vericut to check the paths simulated in proNC.
When I use solid models consisting of both a holder and a cutter as cutting tools I can't send my NC-files and sequences into Vericut.
Does anyone know what's the deal?
 
Replies continue below

Recommended for you

Sort by date Sort by votes
I have the same problem. I use Proe2001 and cannot get Vericut to import solid tools created in Pro. Ive have been told it is a bug in the version of vericut bundled with Pro. Hopefully this will be fixed in later releases. I realise this doesnt help, but at least you are not alone.

Dav
 
Upvote 0 Downvote
Nevertheless,
Thank you Dav
 
Upvote 0 Downvote
Vericut version 5.2 which is bundled with Wildfire allows the use of solid models as cutting tools and shows their movement while running. Previous versions of vericut did not support this option. I know it didn't help, but it is info. Good luck
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

dblcrona
  • Locked
  • Question
Vericut Training options
Replies
0
Views
7
dblcrona
dblcrona

Part and Inventory Search

Sponsor

Back
Top Bottom